特色专栏 > 机械外语
+

机械工程英语——Lesson 7 Keys and Springs

2013/4/1    作者:未知    来源:网络文摘    阅读:714

Keys(键) are used to prevent relative motion between a shaft and machine elements such as gears, pulleys, sprockets(链轮), cams(凸轮), levers(控制杆), flywheels(飞轮), impellers(叶轮), and so on. There are numerous(无数的) kinds of keys (some of which have been standardized(标准化)) for various design requirements. The keys most frequently used are the square keys(方头键), the tapered keys(锥形键), and the woodruff key(半圆形键).

   机械工程英语——Lesson_7_Keys_and_Springs机械工程英语——Lesson_7_Keys_and_Springs            机械工程英语——Lesson_7_Keys_and_Springs          机械工程英语——Lesson_7_Keys_and_Springs机械工程英语——Lesson_7_Keys_and_Springs

Figure7-1 (a) square key       (c) tapered key       (b) woodruff key

机械工程英语——Lesson_7_Keys_and_SpringsPerhaps the most common of these torque-transmitting shaft-to-hub(毂) connections are keys, of which the most common type is the square key. Standard proportions call for the key width to be approximately one-fourth the shaft diameter. Keys are usually made of cold-finished(冷加工的) low-carbon steel, but heat-treated alloy steel is used when greater strength is required.

Mechanical springs are used in machines to exert force, to provide flexibility(弹性) and to store or to absorb(吸收) energy. In general, springs can be classified as either wire springs or flat springs, although there are variations within these divisions(区分). Wire springs include helical springs of round, square, or special-section wire and are made to resist tensile(拉力), compression(压力) or torsional(扭矩) loads. Under flat springs are included the cantilever(悬臂) and elliptical(椭圆) types, the clock-type power-springs and the flat spring washers(垫片), usually called Belleville springs(盘簧).

机械工程英语——Lesson_7_Keys_and_SpringsIn one word,springs are elastic(弹性的) members that exert forces (or torques) and absorb energy (which is usually stored and later released). Springs are usually, but not necessarily(必要地), made of metal. Plastics can be used when loads are light.

Vocabulary

1.key n. 键

2.prevent v. 阻止;防止

3.prevent M (from) +ing

4.sprocket n. 链轮;星轮

5.flywheel n. 飞轮

6.impeller n. 叶轮;涡轮

7.square key  方键

8.tapered key  锥形键

9.woodruff key 半圆键

10.variation n. 变化;差异

11.compressure n. 压缩力

12.cantilever n.悬臂;伸臂

13.elliptical a.椭圆

14.washer n. 垫片;垫圈

15.Belleville springs 贝氏弹簧

16.elastic a. 弹性的

17.torque n. 扭矩;力矩

18.proportion n. 部分

19.diameter n. 直径

20.alloy n. 合金

21.call for 要求;需要

22.cold finished 冷加工;冷轧制

23.heat-treaded alloy 热处理过的合金钢或热轧合金

  • 相关文章
  • 热门文章
免责申明:天天CAD教程网旨在相互学习交流,是一个完全免费的网站,部分原创作品,欢迎转载,部分内容来自互联网,如果侵犯了您的权利请尽快通知我们!邮箱:qm198794@gmail.com天天CAD教程网湘ICP备17006802号
【回到顶部】